FRP Panels & Covers

HKCG|HEADING|Define the panel or cover from the support, span and access requirement.
HKCG|INTRO|FRP panels and covers are used for equipment protection, trench coverage, enclosures and project-specific access areas. A responsible enquiry should identify whether the component is a simple cover, a supported panel or part of a load-bearing access system, then provide span, support, surface, environment and handling requirements.
HKCG|FACTOR|01|Panel geometry|Send width, thickness, finished length, edge direction and any joint detail.
HKCG|FACTOR|02|Support and load|State clear span, support spacing, traffic type and required engineering criteria.
HKCG|FACTOR|03|Surface and access|Confirm smooth, textured or anti-slip direction and whether routine access is required.
HKCG|FACTOR|04|Environment and packing|Name water, chemicals, UV, labels, bundle size and destination.
HKCG|USE|Water treatment facilities
HKCG|USE|Industrial access areas
HKCG|USE|Cooling tower equipment zones
HKCG|ROUTE|Engineering Support|Review span, support and environment before profile selection.
HKCG|ROUTE|Custom Pultrusion|Discuss a private panel edge, cover section or equipment interface.
HKCG|FAQ|Is an FRP cover the same as FRP grating?|No. Covers and panels create a more continuous surface; grating uses an open-grid walking surface. Select based on drainage, access and load needs.
HKCG|FAQ|What load information is required?|Provide span, support, traffic type, point or distributed loads and the governing engineering criteria.
HKCG|FAQ|Can panels include anti-slip surfaces?|Surface direction can be reviewed with access, cleaning, exposure and sample requirements.
HKCG|FAQ|Can covers be cut to project sizes?|Finished size and basic processing can be discussed after drawings, tolerances, quantities and packing constraints are known.