FRP Angles

HKCG|HEADING|Select FRP angle profiles around the connection—not only the leg size.
HKCG|INTRO|Pultruded FRP angles are open L-shaped profiles used for framing, edge protection, bracing, brackets and equipment supports. A responsible selection combines equal or unequal leg dimensions with wall thickness, inside corner, fastening details, exposure conditions and the surrounding structural system.
HKCG|FACTOR|01|Angle geometry|Confirm equal or unequal legs, wall thickness, inside corner and finished length.
HKCG|FACTOR|02|Connection detail|Provide fastener, hole, slot, bearing and mating-surface information.
HKCG|FACTOR|03|Service environment|Name moisture, chemicals, UV, salt air or electrical conditions.
HKCG|FACTOR|04|Structural responsibility|Share loads and support spacing; final structural design remains with the project engineer where required.
HKCG|USE|Industrial platforms
HKCG|USE|Cooling tower and HVAC supports
HKCG|USE|Marine and coastal structures
HKCG|ROUTE|Custom Pultrusion|Review an unequal or private angle from a drawing.
HKCG|ROUTE|Engineering Support|Clarify load, connection and environment questions.
HKCG|FAQ|What is the difference between equal and unequal FRP angles?|Equal angles use the same leg dimension; unequal angles use two different legs to suit a specific edge, bracket or connection.
HKCG|FAQ|Can FRP angles be supplied with holes?|Basic hole and cut requirements can be reviewed from a drawing with tolerances and quantities.
HKCG|FAQ|Can FRP angles replace steel angles directly?|A direct substitution should not be assumed. Send the load path, span, connection and environment for project review.
HKCG|FAQ|Are custom leg dimensions possible?|A new or private section may require tooling. Feasibility, sample route and MOQ are confirmed after drawing review.